Центральний термінал BDCOM P3616-2TE (EPON OLT 16xPON, 4x1G SFP, 4x1G SFP / RJ45, 2x10G S

Артикул: P3616-2TE

Код: 355557
System’s capacity Maximum coupling ratio, 1:64 128G backplane bandwidth MAC table volume: 32K Interface PON: 16 EPON interfaces Uplink interface: 8 GE interfaces (4 GE optical interfaces, 4 GE TX/ SFP interfaces), The device can be expanded to support two extra 10G interfaces. Attributes of the PON Interface A 1Gbps transmission rate with downlink and uplink symmetry Average emitting power of the PON port: +2dbm ~ +7dbm Light reception sensitivity of the PON port: no less than -30dBm Security: ONU authentication mechanism Standard IEEE802.3ah IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad physical link static/ dynamic aggregation (LACP) Ethernet – II QoS Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) IEEE 802.1p, CoS WR, SP and FIFO Limiting the uplink/ downlink rate based on each ONU Supporting DBA and SLA VLAN Port-based VLAN Supporting QinQ and flexible QinQ L3 functions Static route, RIPv1/ v2, OSPF, etc Routing volume of the host: 8K Multicast IGMP IGMP Snooping Reliability Unidirectional Link Detection (UDLD) Hot swap of the EPON optical module on the expanded slot Optical path protection of EPON Check of abnormally illuminating ONU Network security Limiting the maximum number of users on each port Port isolation Controlling the storm of packets Flow-based ACL access control function Transmission data encryption on the PON interface Configuration Management Various management modes such as CLI, SNMP and TELNET Conducting software upgrade through TFTP and FTP Command prompt in English or in Chinese Debug output Physical Characters 442.5mm(W) x300mm(D) x 44mm(H) Installation: A 19-inch cabinet Weight: 2kg Environment requirements Working condition: 0℃-55℃, 10%-85% non-condensing Storage condition: -40℃-80℃, 5%-95% non-condensing Power source Input voltage: AC90~264V, DC -36 ~ -72V Two power inputs, AC-DC-hybrid power inputs and hot swap of power modules are supported Over-current protection and over-voltage protection are also supported.
Цей товар тимчасово недоступний для замовлення
  • Рахунок з ПДВ 20% Рахунок з ПДВ 20%
  • Адресна доставка «Нова пошта» Адресна доставка «Нова пошта»
    дату отправки уточняйте...
  • У відділення «Нова пошта» У відділення «Нова пошта»
    дату отправки уточняйте...
  • Кур'єр по Києву Кур'єр по Києву 60
    дату отправки уточняйте...
  • Обмен/возврат Обмін/повернення: 14 дн.

Опис терміналу BDCOM P3616-2TE Центральний термінал
BDCOM P3616-2TE - лінійний оптичний термінал 3-го
уровня для мереж доступу на базі технології
GEPON. Термінал має скроню Надійність, підвіщену
Щільність портів GEPON, шірокі комутаційні
возможности та маршрутізацію трафіку. Термінал
керується ефективного операційною системою
BDROS.
Пристрій BDCOM P3616-2TE має 16 портів GEPON та 16 портів
GE. Опціонально підтрімуються 2 порти 10GE.
Прісутнє Резервування блоків живлення.
Особливості моделі:
- 16xPON
- 4x1G SFP
- 4x1G SFP / RJ45
- 2x10G SFP +

Вес упаковки не задано
Гарантия 12 мес.
Производитель BDCOM
Тип Терминальный блок

* Характеристики, комплект поставки та зовнішній вигляд товару можуть відрізнятися від зазначених і/або можуть бути змінені виробником без відображення в картці товару.