Power distribution device Rack PDU 2G, Switched, ZeroU, 32A, (21) C13 ( (AP8953)

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Output
Maximum Total Current Draw per Phase 32A
Output Connections
(21) IEC 320 C13
(3) IEC 320 C19
Overload Protection
Yes
Nominal Input Voltage
200V, 208V, 230V
Input Frequency
50/60 Hz
Input Connections
IEC 309 32A 2P+E
Cord Length
10 feet (3.05 meters)
Number of Power Cords
1
Acceptable Input Voltage
220-240 VAC
Maximum Line Current per phase
32A
Maximum Input Current per phase
32A
Color
Black
RoHS
Compliant
REACH
REACH: Contains No SVHCs
PEP
Available in Documentation tab
EOLI
Available in Documentation tab
Battery Directive
Compliant
Battery Notes
Contains Lithium Coin Cell
Item Dimension (L"xW"xH")
4.9 x 6.5 x 80.3
weight
21.90 lb
Warranty Infotmation
2 years repair or replace