Cooler for the case ThermalTake Riing 12 (CL-F038-PL12BU-A)

Fan size: 120 x 120 x 25 mm

Starting voltage: 9.0 V

Rated voltage: 12.0 V

Rated current: 0.2 A

Input power: 2.4 W

Fan speed: 1500 RPM or 1000 RPM (with LNC)

Maximum air pressure: 2.01 mm-H2O

Maximum airflow: 40.6 CFM

Noise: 24.6 dB-A or 18.7 dB-A (with LNC)

Bearing Type: Hydraulic Bearing

Life expectancy: 40,000 hrs, 25,

Connector: 3 PIN + LNC (Low-Noise Cable)

Weight: 158.8 g



Additional Information:
- Thermaltake is a series of 120mm cooling fans Riing 12. The special shape of the blades allows you to create high air pressure with low noise levels. To further minimize noise levels, high-quality hydraulic bearings and anti-vibration fasteners are used.

The patented design of the luminous ring with four variants of bright backlighting (blue, red, white and green) will give a special style to your PC.



- Only those products from Thermaltake that meet the highest requirements for design, ergonomics and cooling quality are awarded with a special certificate of compliance Tt LCS. Having a Tt LCS certificate means that the product is ready for operation in a liquid cooling system, from the initial level (all-in-one systems) to complex component systems (all components are purchased separately at the discretion of the user). Tt LCS certified products are the choice of a true enthusiast.



- Compared to standard fans, a combination of 3 Riing 12s together with a radiator RL360 provide 40% more efficient cooling. The inlet and outlet coolant temperatures are 49, and 44.5 ℃, respectively (△, T = 4.5,).



- The special shape of the blades of the Riing 12 fans helps to concentrate the entire air flow closer to the edge, this allows to increase the air pressure, which is very important for the SVO radiators.



- To further optimize cooling, there is a special protrusion on the inside of the fan frame that allows you to direct part of the air flow into the middle of the fan. This avoids the partial blowing of air around the edges of the fan and achieve a minimum level of aerodynamic noise.



- To minimize the noise level and increase the service life, high-quality hydraulic bearings are used in the fans of the Riing 12 series. In order to avoid leakage of lubricating fluid, oil seals are installed on both sides, which also protect against dust and other dirt.



- To reduce the fan speed there is a special cable in the kit, connecting which noise level will decrease from 24.6dBA to 18.7dBA.



- Thanks to specially integrated rubber fasteners, the overall vibration level was reduced by 80%.